Step by Step Guide: Connecting a Sungrow Inverter to Wifi

Step by Step Guide: Connecting a Sungrow Inverter to Wifi

Step 1: Download the iSolarCloud App

  • Download the iSolarCloud app from the App Store (iPhone) or Google Play Store (Android).

Step 2: Connect to the Inverter’s Wi-Fi

  • On your phone, go to Wi-Fi settings.

  • Look for a network that starts with "SG-" (e.g., SG-xxxxxxxx).

  • Connect to it. If asked for a password, try 12345678 (or check the label on the inverter).

Step 3: Set Up Wi-Fi Connection via the App

  • Open the iSolarCloud app.

  • Log in or create a new account if you don’t have one yet.

  • Tap Device Configuration > Add Device > WLAN Settings.

  • Choose your home Wi-Fi network from the list and enter your Wi-Fi password.

Step 4: Complete the Setup

  • After connecting, the inverter will automatically link to your Wi-Fi.

  • You should see your system online through the iSolarCloud app within a few minutes.

A few reminders:

  • Make sure your Wi-Fi router is close enough to the inverter for a strong signal.

  • Sungrow inverters usually connect to 2.4GHz Wi-Fi networks only (not 5GHz).

  • If you run into any issues, try rebooting your inverter and router.

    • Related Articles

    • Step-by-Step Guide: Connecting GoodWe Inverter to Wi-Fi

      Step-by-Step Guide: Connecting GoodWe Inverter to Wi-Fi Download and Open PV Master Install it from the App Store or Google Play Store. Open the app and select “Local Mode.” Connect to the Inverter's Wi-Fi On your phone, go to Wi-Fi settings. Look ...

    • Step by Step Guide: Connecting Fronius Inverter to Wifi

      Step 1: Activate the Inverter's Wi-Fi Access Point On the inverter's screen, press the Enter key (middle button). Navigate to: Setup > Wi-Fi Access Point > Enable The inverter will start broadcasting a network like: FRONIUS_240.xxxxxx ? Step 2: ...

    • Step By Step Guide: Connecting Solar Edge Inverter to Wifi

      Steps to Connect Your SolarEdge System to Wi-Fi: Turn on the Inverter: Ensure your SolarEdge inverter is powered on and functioning properly. Access the Inverter's Wi-Fi Settings: On the inverter, locate the "Communication" or "Wi-Fi" button (this ...

    • Step By Step Guide: Connecting SMA Inverter to Wifi

      ? Steps to Connect Your SMA Inverter to Wi-Fi: 1. Power On the Inverter Ensure your SMA inverter is powered on and the display (if applicable) is active. 2. Activate the Inverter’s Wi-Fi SMA inverters typically broadcast their own Wi-Fi network upon ...

    • Step-by-Step Guide: Connecting Victron Devices to Wi-Fi

      Step 1: Prepare Your Victron Device Ensure that your Venus GX or Cerbo GX is powered on and fully initialized. The device should have its display or LEDs active. Step 2: Access Wi-Fi Settings on Your Victron Device Option 1: Using the Display (for ...