Unable to Establish Internet Connection with Victron
Let’s try restarting both your Wi-Fi router and the SkyBox to refresh the connection.
🔁 Restart the Wi-Fi Router
Turn off the router by:
• Unplugging it from the power outlet, or
• Pressing the power button (if it has one).
Wait 30 seconds.
Turn it back on and wait about 1–2 minutes for it to fully reboot and re-establish internet.
🔁 Restart the Skybox
To reboot the Cerbo GX using the touchscreen:
1. Tap the Menu button on the bottom right then Settings.
2. Navigate to General.
3. Look for "Reboot?".
4. Tap "Reboot?" and confirm the action when prompted.
5. Wait for the system to power cycle and reconnect to the network.
Related Articles
Step-by-Step Guide: Connecting Victron Devices to Wi-Fi
Step 1: Prepare Your Victron Device Ensure that your Venus GX or Cerbo GX is powered on and fully initialized. The device should have its display or LEDs active. Step 2: Access Wi-Fi Settings on Your Victron Device Option 1: Using the Display (for ...How to connect your DEYE Inverter to the internet using LAN cable
How to Connect Your DEYE Dongle to a LAN ConnectionHow to Check the Battery Charging Rate (for VICTRON)
Go to Settings. DVCC. Maximum charge current. Increasing charge current allows the battery to absorb more power when solar production is high, reducing charging time. The highest allowable charge current will depend on the rating of the circuit ...How to Check Firmware Update in Victron via Remote Console
Here’s how you can check for any recent firmware updates for your Skybox. You can do this through the remote console on the VRM system. On the remote console, go to SETTINGS: Select FIRMWARE: The BUILD DATE/TIME will show you when was the last ...How to Check if My Battery is Working in Victron
1. From the Cerbo GX screen, click Menu. 2. Select Pylontech battery (or BSL). 3. Go to Details. 4. Under Battery modules, confirm it shows 12 online, 0 offline (or matching the number of connected batteries). This indicates all battery modules are ...